Micro Detailer Intensity-7 Add Pac—Extreme Ceramic Polymer Car Wash Solution

Description

Micro Detailer Intensity-7 Add Pac—Extreme Ceramic Polymer Car Wash Solution

► Converts conventional car soap to intense ceramic wash
► Adds a glossy, durable, hydrophobic, SiO2 finish
► Reduces water spots with premium water softeners
► Increases safety with extreme 4X lubrication
► Extends life of Intensity-7 ceramic coatings

Breakthrough Multi-Use Formula:

► Add to Foaming Wash
► Add to Foam Cannon
► Add to Bucket for Rinseless Wash
► Add to Spray Bottle for Waterless Wash or Instant Detailer

Most concentrated ceramic wash! Use at 1 ounce per gallon (1:128)! Compare to department store ceramic washes which use 3 ounces per gallon (1:43) or other premium ceramic washes which use a 1:9 dilution!

DIRECTIONS (Shake before use. Use protective hand covering. Do not use on hot surface.):

Bucket Wash:

For Hand Washing (conventional/rinseless): Mix 1 oz. (2 capfuls) of liquid per gallon of water (or prepared foaming wash solution) in a bucket. For Pressure Foam Cannon Washing: Pour 2– 4 oz. (4–8 capfuls) of liquid, along with your conventional car soap into a standard foam cannon bottle and mix with water.
1. Rinse surface with water to flush loose dirt (conventional/cannon wash)
2a. Hand wash: Starting with the roof, wash one section at a time with wash mitt in straight motion, working from top to bottom
2b. Foam cannon: Spray onto surface. Starting with the roof, wash entire car with wash mitt in straight motion, working from top to bottom
3. Rinse well with clean water (conventional/cannon wash)
4. Dry with a quality drying towel
For optimal results: Pre-treat each section by spraying with a solution of 1 oz. Intensity-7 Add_Pac to 16-24 oz. water.

Waterless Wash:

1. Add 1 oz. (2 capfuls) to a spray bottle
2. Fill with 16-24 oz. of water and shake
3. Starting with the upper panels, working with ½ panel at a time, spray section
4. Using a folded, PLUSH microfiber towel and a light, “sweep- and- lift” motion, GENTLY wipe the emulsified dirt away
5. Wipe dry with a clean microfiber towel
6. Switch to a clean side of towel and repeat the process
7. Refold and/or replace the towel as it becomes soiled. Heavily-soiled areas may need a second wash before drying.

Instant Detailer:

1. Add 1 oz. (2 capfuls) to a spray bottle
2. Fill with 24-32 oz. of water and shake (adjust as needed)
3. Mist one panel at a time and use a soft, clean microfiber towel to wipe off dust and dirt. Flip the towel and buff to a deep shine.