Micro Detailer MD Acrylic Tire Coating—Extreme Bond Tire Protectant

Description

Micro Detailer MD Acrylic Tire Coating—Extreme Bond Tire Protectant ^TM is a long-lasting, semi-permanent tire sealant/protectant, which leaves no sticky residue. Unlike most tire dressings, which use high amounts of simple, greasy, silicone oils, MD Acrylic Tire Coating uses high-bond-strength acrylic polymers to bond to the tire. This creates a tough, non-greasy, semi-permanent coating on your tire, which can last many weeks to a few months or more, depending on environmental conditions, application process and miles driven; and will outlast any of those simple, silicone oil-based tire dressings.

►MD Acrylic Tire Coating—Extreme Bond Tire Protectant

• Non-greasy, extreme-durability coating reduces dust, dirt, and eliminates sling of most conventional tire dressings
• Hydrophobic beading action helps keeps tires cleaner, longer and helps repel dirt, dust, snow & rain
• Superior conditioners protect from sun & ozone degradation that can cause drying and browning, preserving your tires for the long term

► Dial-in the Finish

• Achieve a rich, Black sheen, with one layer, or
• Go for a glossier sheen, by adding another coat

► Lasting Finish

• Outlasts any of those simple, silicone-based tire dressings you buy off the shelf
• Lasts weeks or even months longer than off-the-shelf, greasy, silicone oil-based dressings. Durability is affected by specific tire, miles driven, number of coats, environmental conditions, and the state of the tire prior to application.
• The cleaner the tire, prior to application, the better the bonding and the greater the durability

► Directions

Shake well. Use on cool, well-cleaned, dry surface.

• Make sure tire is as clean as possible, before application. Multiple washes may be necessary; consider use of a specialized tire cleaner
• Hold bottle 3” to 5” away from tire (holding too closely may cause drips) and spray evenly on tire
  • For a Rich Sheen (one layer): Evenly wipe in liquid using a foam or microfiber applicator or soft cloth. Let stand 15 minutes or until dry before driving
  • For Glossy Sheen: (two layers) Wait 30 minutes after first layer, then re-apply an additional time, as above; allow to dry

► Cleaning Treated Surfaces

• For lightly-soiled, dusty tires, a strong stream of water may be all that is needed
• For heavily-soiled tires, clean treated surfaces with a simple, soapy solution; harsh detergents are not recommended or necessary